SD1024F Spectrometer
Discontinued Spectrometers
Spectrometers are optical emission monitors that integrate sophisticated embedded processors and software designed to provide intelligent instrument control, data acquisition and endpoint interface capabilities.
[wp-svg-icons icon="warning" wrap="i"] The spectrometers below are no longer available and are replaced by the SD1024G Series. More on the SD1024G Series.
We’ve gone the extra mile, so you don’t go the extra nanometer.
SD1024FTM
High Performance
The SD1024F was designed for demanding semiconductor process applications. Its optical system employs a 1024-element, scientific-grade CCD array specifically designed for multi-channel spectroscopy, offering high performance at a moderate cost. The advantages of the SD1024F include excellent ultraviolet (UV) response (down to 200nm), stability against degradation under UV exposure, high sensitivity, wide dynamic range and superior output linearity. The unique optical platform results in highly efficient imaging of spectral information at the element of the two-dimensional detector array.
Features & Benefits
- For demanding applications
- Provides robust endpoint determination
- SpectraViewTM software provides:
- Variety of algorithms
- Open algorithms and sequences for flexibility
- Tool integration via Ethernet, RS232, and DI/O
- Use for endpoint detection, fault detection, and process diagnostics
- 200–800nm range
- Single or multi-fiber input
- Scientific grade CCD
- RoHS Compliant
SD1024FHTM
Ultra Performance
The SD1024FH is the same as the SD1024F, except it uses lower noise electronics and high throughput optics. The SD1024FH was designed for the most demanding applications. Signal to Noise performance is achieved via a ~ 75% greater optical throughput, proprietary data acquisition scheme, novel signal processing methods, and superior system noise control.[/vc_column_text][/vc_column][vc_column width="4/12"][vc_column_text]
Features & Benefits
- For the most demanding applications
- Provides robust endpoint determination
- SpectraView™ software provides:
- Variety of algorithms
- Open algorithms and sequences for flexibility
- Tool integration via Ethernet, RS232, and DI/O
- Use for endpoint detection, fault detection, and process diagnostics
- 200–800nm range
- Same as SD1024F, except:
- Higher throughput optics
- Lower noise electronics
SD1024FLTM
General Purpose
The SD1024FL was designed for general purpose semiconductor process applications. It uses a 2048-element, one-dimensional CCD designed for cost effective operation. The CCD is phosphor coated for UV sensitivity. The SD1024FL uses a simple optical platform and the same 16-bit A/D electronics as the SD1024D.
Features & Benefits
- For general purpose applications
- Provides robust endpoint determination
- SpectraView™ software provides:
- Variety of algorithms
- Open algorithms and sequences for flexibility
- Tool integration via Ethernet, RS232, and DI/O
- Use for endpoint detection, fault detection, and process diagnostics
- 200–800nm range
SD2048DLTM
High Resolution
The SD2048DL is nearly identical to the SD1024DL, but reports spectral data in 0.25nm increments instead of 0.5nm readings as in the SD1024D and SD1024DL. This is done by using a narrower inlet slit and modified embedded software parameters. Although the SD2048DL has better resolution than the SD1024DL, its sensitivity is diminished by about one order of magnitude.
Features & Benefits
- For high resolution applications
- Provides robust endpoint determination
- SpectraView™ software provides:
- Variety of algorithms
- Open algorithms and sequences for flexibility
- Tool integration via Ethernet, RS232, and DI/O
- Use for endpoint detection, fault detection, and process diagnostics
- 200–800nm range
- Bright plasma required
SD512NIRTM
General Purpose
The SD512NIR Series spectrographs are optical emission monitors that integrate sophisticated embedded processors and software designed to provide intelligent instrument control, data acquisition and endpoint interface capabilities. The SD512NIR Series uses a common CPU board, application software and enclosure as the SD1024D Series.
The SD512NIR was designed for demanding semiconductor process applications. Its optical system employs a 512-element, Linear Indium Gallium Arsenide Photodiode Array. The advantages of the SD512NIR include excellent sensitivity over the 900 – 1700 nm range, user-selectable high sensitivity and high dynamic range modes, a three-stage thermoelectric cooler which reduces thermal noise, and an integrated blocking filter which eliminates 2nd and higher orders.[/vc_column_text][/vc_column][vc_column width="4/12"][vc_column_text]
Features & Benefits
- Provides robust endpoint determination
- SpectraView™ software provides:
- Variety of algorithms
- Open algorithms and sequences for flexibility
- Tool integration via Ethernet, RS232, and DI/O
- Use for endpoint detection, fault detection, and process diagnostics
- 900 nm–1700 nm range
- Same form factor as the SD1024D